UMBVS 

UMBVS	Product Code: umbvs Price: Check Latest Switch Mode DC Power Supplies Universal Series: BVS , 5Watts - 10 Watts * Ultraminiature Size * Wide Range 90-264VAC Input * 3.3VDC to 24VDC Output * Single/Dual Output Models * 3000VAC In-out Insulation * UL, CSA and CE marked
Applications AC Input: Wide range input from 90-264VAC DC Outputs: See Voltage/Current Rating Charts Output Power: See Voltage/Current Rating Charts. Brown-Out Voltage: Regulation is maintained with full rated load at 90VAC . Hold-Up Time: 20 msec typical at full rated load and nominal AC input voltage. Hold-up time increases to 40 msec at 50% load. Efficiency: Measured at full rated load and nominal AC input voltage. 75% ±5% depending on how the load is distributed among the outputs. Regulation Characteristics: See Voltage/Current Rating Charts for individual model ratings. Measurement method: Line: Measured over a 90-132VAC or 175-264VAC line change. Load: Measured over a 20% to 100% load change. Multiple output model regulation is subject to the minimum load requirements. Initial Setting Tolerance: Measured at 50% of full rated load on all outputs. Input Protection: AC input line fuse provided. Internally located. Output Noise and Ripple: 0.3% RMS, 1% PK-PK Typical. Overload Protection: Fully protected against output overload and short circuit. Automatic recovery upon removal of overload condition. Delayed-fold back current limiting characteristic assures reliable turn-on into reactive and non-linear loads. Power-Up Initialization Period: Typical 2.0 sec turn-on delay assures orderly ramp-up and stabilization of all output voltages during power-up. Overvoltage Protection: Clamp, 130-150%. Temperature Rating: Operating: 0°C to +50°C at full rated output power. Derate linearly to 50% of full load from 50°C to 70°C. Storage: -55°C to +85°C. Temperature Coefficient: ±0.03%/°C typical, ±0.05%/°C maximum over entire operating temperature range of 0°C to +70°C. Shock: Operating: 20G peak acceleration.   Cooling: Convection cooling is adequate for convection power ratings providing that non-restricted convection air movement is available. When operating in a confined area, forced air cooling is recommended. Vibration: Random vibration from 10Hz to 2KHz, 6.15 grms (3 axis). Safety Agency Certifications: (pending) UL 1950 without D3 deviation, file #E181899 CSA C22.2 No. 950, UL file #E181899 CE Marked Schematics   Mechanical Drawing   Dimensions     Standard Models   SINGLE OUTPUT MODELS - 5 Watts and 10 Watts Nominal Voltage Convection Cooled Current Model Initial Setting Tolerance Line Regulation Load Regulation Output Adjustment Range(min) Configuration 3.3V 1.5A BVS-F05S10032 3.3V ± .1V 0.2% 3% 3.0V to 3.6V BOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm) 3.0A BVS-F10S10032 5.0V 1.0A BVS-F05S10052 5.0V ± .1V 0.2% 1% 4.75V to 5.50V BOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm) 2.0A BVS-F10S10052 12.0V 0.42A BVS-F05S10122 12V ± .1V 0.2% 1% 11V to 13V BOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm) 0.85A BVS-F10S10122 15.0V 0.34A BVS-F05S10152 15V ± .2V 0.2% 1% 14V to 16V BOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm) 0.68A BVS-F10S10152 24.0V 0.21A BVS-F05S10242 24V ± .2V 0.2% 1% 22V to 25V BOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm) 0.42A BVS-F10S10242 DUAL OUTPUT MODELS - 5 Watts and 10 Watts Nominal Voltage Convection Cooled Current Model Initial Setting Tolerance Line Regulation Load Regulation Output Adjustment Range(min) Configuration ± 5.0V ± 0.50A BVS-F05M20052 5.0V ± .1V 0.2% 2% 4.75V to 5.50V BOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm) ± 1.0A BVS-F10M20052 ± 12.0V ± 0.21A BVS-F05M20122 12V ± .1V 0.2% 2% 11V to 13V BOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm) ± 0.42A BVS-F10M20122 ± 15.0V ± 0.17A BVS-F05M20152 15V ± .2V 0.2% 2% 14V to 16V BOARD ONLY 2.25" x 2.95" x 0.54" (57.2mm)x(74.9mm)x (13.7mm) ± 0.34A BVS-F10M20152